จำนวนครั้งที่อ่าน : 503
The DPMC is an MM/MC phono preamplifier with a level control. It uses 4 ECC83 for the preamp and for the RIAA correction. Tube regulated power supply ensures stability of this unit. The MkII version feature a new internal layout for better isolation and also allows the input impedance to be switched between 48KΩ, 1KΩ, 300Ω, 100Ω for a better match with your cartridge. This unit is ideal to equip an integrated amplifier with a state-of-the-art phono stage that will allow you to rediscover your records collection. The DPMC is also available without volume control.
The Jadis JP80MC is the most well known preamplifier made by Jadis. Built with 4 line, 1 MM and 1 MC input the JP80MC will allow you to connect any analog sources you migh want to use. The phono stage will accept all type of cartriges even the ones with a very low impedance. Also, the power supply is over sized and separated in order to preserve the fragile audio signal. Enormous technical effort were made to develope this piece of equipment and these efforts had only one purpose: the ambition of biulding the best preamplifier in the world.
Built with 4 line, 1 MM and 1 MC input the JP200MC will allow you to connect all the analog sources you migh want to use. The phono stage will accept any cartriges even the ones with a very low impedance. Moreover this is a 4 blocks unit, with separatedand over sized power supply and a switch that allows the user to switch the phase to his convenience. The JP200MC include all the ingredient that make great sounding preamplifier
The ultimate expression of the art. Line pre-amplifier with output transformer.The JP500 is an absolitly no compromise unit at the service of music reproduction. Built-in balanced and unbalanced capability. 14dB of gain, 6 line inputs, 2 outputs. Bandwidth 20 Hz - 50kHz. Tube complement: 6 ECC82, 2 ECC83, 2 EF86, 6 EL84. A switch allows the user to change the abolute phase to his convenience.
Available in balanced (JPS2S) or unbalanced (JPS2) version. The Jadis JPS2 is a line preamplifier which uses 3 ECC83 for the line function plus a ECC82 tube to adapt the impedance on the CD entry. Its specific power supply recreates a voltage for the module with a 80 Hz frequency in order to avoid problems that can occur due to the 50 or 60 Hz frequency from the mains supply. The high voltage is regulated by two tubes: 1 x EF86 and 1 x EL84. Golden connector and further connections are in copper and silver which assure the faithful broadcast of the audio signal. The "point-to-point" wiring gives to the sound stage plenty of aeration and dimension. The choice of the electronic components and the extremely careful fabrication method gives the signature JADIS to this device.
Phono preamplifier with separate power supply. This Jadis includes an MM and MC phono preamplifier that uses three ECC83 for MM and 2 6DJ8 for the MC stage. As for the JPS2, its specific power supply recreates a voltage for the module with a 80 Hz frequency in order to avoid problems that can occur due to the 50 or 60 Hz frequency from the mains supply. The high voltage is regulated by two tubes: 1 x EF86 and 1 x EL84.
The Pré1 is the brand new line stéreo preamplifier from Jadis. It is a perfect match with the also brand new PA100 power amplifier. This preamplifier can come in either fully balanced or single ended version. The design clearly shows that this unit was developed in the pure Jadis tradition of building quality and musicality.
The MkIII version is characterized by several improvement such as, Lundahl step-up transformers on MC stage, high voltage regulation by tube , new design for PC board ( double side, 70µ copper) and output stage capacitor specially designed for Jadis. A new version which will bring a beautiful transparency and musicality to your music.